User Guide

Utilities 147
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Using RCONPRXY
 Use RCONPRXY.NLM to allow RConsoleJ to communicate with an
NetWare 6 server IPX-only.
RCONPRXY creates a proxy server through which RConsoleJ can
communicate with the IPX-only server.
 The proxy server must run both IP and Streams-based SPX
TM
services.
To load Streams-based SPX services on the proxy server, use the SPXS
NLM
TM
program.
Additional Information
TCP Port This is the TCP port number on which RCONPRXY will
listen for RConsoleJ.
The default is 2035.
0 allows a dynamically assigned port to be used.
Topic See
Loading RCONAG6 “RCONAG6” on page 144
Setting up a proxy server See Loading the RConsoleJ Proxy Agent on a
Proxy Server in Setting Up RConsoleJ in the
Remote Server Management Administration
Guide
Using RConsoleJ “RConsoleJ” on page 148
Parameter Use to