User Guide

Utilities 151
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
If you don’t enter the NSS volume name parameter, you will be prompted
to select it.
Additional Information
RECORD
Purpose
Use at the server console to record command sequences that you enter at the
console over and over. The RECORD command creates a temporary batch file
on the server. You can then save the temporary batch file as an .NCF file or
delete it from memory.
Syntax
RECORD [ACTION] | [temporary batch file name]
For example:
Topic See
Maintaining NSS volumes Viewing Storage Objects
Setting up NSS volumes Setting Up and Configuring Novell Storage
Services in the Novell Storage Services
Administration Guide
To Enter
Begin recording console commands into a memory
batch file called MYLIST1
RECORD START MYLIST1
Close the recording session for the temporary batch
file named MYLIST1
RECORD STOP
Type the command sequences in the session
named MYLIST1
RECORD TYPE MYLIST1
Remove the recorded session named MYLIST1
from server memory
RECORD KILL MYLIST1