User Guide

62 Other Installation Options
Other Installation Options
103-000143-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Default IPX Frame Typer=<string>
[NWI:TCPIP] Section
Logical Name n = <string>
IP Address n = <decimal number>
Default (none)
Values (Frame types that are supported by a driver are found in the
driver’s LDI file
Key Required No
Example Default IPX Frame Type=Ethernet 802.2
Purpose Identifies the network frame type to be bound to the IPX stack
when the "Single Network Adapter" is set to True.
Default (none)
Values (name identified in the Network Adapter sections of the
response file)
Key Required No, unless IP is to be bound.
Example Logical Name 1 = 3C59X_1_EII
Purpose Identifies the name of the adapter and frame type that the
protocol is to be bound to.
Default (none)
Values (valid IP address)
Key Required No, unless Logical Name is set
Example IP Address 1 = 130.1.130.1
Purpose Specifies the IP address to be bound.