User Guide

160 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
REMOVE STORAGE ADAPTER
Purpose
Use at the server console to remove one instance of a storage driver.
Syntax
REMOVE STORAGE ADAPTER An
Parameter Use to
board_number Specify the logical board number. Find the logical board
number in MONITOR by selecting LAN/WAN Drivers
and highlighting the driver name. The information
window at the top of the screen displays information
about the driver, including Logical Board Number.
board_name Specify the logical board name. A name can be
assigned to a logical board when the board is loaded
using the LOAD command. If no name was assigned to
the board, use the logical board number.
Parameter Use to
An Specify the driver instance you want to remove.
Find the number by entering the LIST STORAGE
ADAPTERS command at the console. The An number is
enclosed in square brackets to the left of the storage
adapter name. For example:
[V312-A0] ADAPTEC PCI Host Adapter Module
To unload the instance of the driver in the example, you
would enter the following:
REMOVE STORAGE ADAPTER A0