User Guide

Utilities 165
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
RESET ROUTER
Purpose
Use at the server console to reset the router table in the server if the table
becomes inaccurate or corrupted.
Syntax
RESET ROUTER
Using RESET ROUTER
 If several servers or bridges go down, packets sent to or through their
routers are lost. Use RESET ROUTER to update router tables on active
servers.
 Normally, the router updates its tables every minute. This command
updates the router table immediately.
Parameter Use to
board_number Specify the logical board number. Find the logical board
number in MONITOR by selecting LAN/WAN Drivers
and highlighting the driver name. The information
window at the top of the screen displays information
about the driver, including Logical Board Number.
board_name Specify the logical board name. A name can be
assigned to a logical board when the board is loaded
using the LOAD command. If no name was assigned to
the board, use the logical board number.