User Guide

Utilities 169
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Using RIGHTS
 If you use + (plus) to add rights, the rights you list are added to the
existing rights.
 If you use - (minus) to remove rights, the rights you list are deleted from
the existing rights.
 If you add and delete rights in the same command, group all added rights
together and all deleted rights together.
 If you list rights without using + or -, the rights you list replace the
existing rights.
 You must always specify a path. You can use a period (.) to represent your
current directory.
 You can use wildcard characters.
Examples
 To set the trustee rights in the current directory for user JANICE to Read,
Write, and File Scan, type
RIGHTS . R W F /NAME=JANICE
 To remove user ERNESTO from ALICE/SYS:USERS, type
RIGHTS ALICE/SYS:USERS REM /NAME=ERNESTO
 To see where user PATRICK’s inherited rights came from for
SYS:USERS/HOME, type
RIGHTS SYS:USERS/HOME /NAME=PATRICK /I
ROUTE
Purpose
Use at the server console on a token ring cabling system to pass frames
(packets) from NetWare
®
through IBM*-compatible source route bridges.
ROUTE enables the operating system to
 Keep track of the source routing information in the frames
 Configure the source routing information in the frames according to the
parameters with which ROUTE is loaded
NOTE: You must load the token ring LAN driver before you load ROUTE.