User Guide

170 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
ROUTE and most ROUTE parameters can also be configured using the
INETCFG utility. See “Configuring Source Route End Station Parameters
with INETCFG” on page 174.
Syntax
[LOAD] [path]ROUTE [BOARD=number] [NAME=board_name]
[DEF|GBR|MBR] [TIME=number] [RSP=AR|NR] [CLEAR] |
[REMOVE=number] [XTX=number] [UNLOAD [BOARD=number]]
Parameter Use to
path Specify the path to ROUTE.NLM if you moved it
from the default directory.
BOARD=number Specify the board you want to change parameters
on or load ROUTE for. Replace number with the
board number.
If you don’t specify a board number, the default is
board number 1, or the board name specified in
the NAME parameter.
The system numbers the boards, using 1 for the
first driver loaded. (Check the order in the
autoexec.ncf file.)
NAME=board_name Specify the board name.
DEF (Default) Specify that all Unknown Unicast frames are to be
sent as All Routes Broadcast frames.
If DEF is specified, all frames with addresses not
in the server’s Source Routing table are forwarded
as All Routes Broadcast frames.
If DEF is not specified, all frames with addresses
not in the server’s Source Routing table are
forwarded as Single Route Broadcast frames.
If ROUTE is already loaded with the DEF
parameter, reloading ROUTE with DEF sends all
Unknown Unicast frames as All Routes Broadcast
frames.