User Guide

Utilities 175
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NOTE: To remove source route bridge support for the specified board, disable the
binding.
Additional Information
Send Frames with Unknown
Address
(same as DEF [Default]
command line parameter)
Specify the type of explorer frame the end station source router sends to
an unknown node address.
Options: Single Route Explorer Frame, All Routes Explorer Frame
Default: Single Route Explorer Frame
Send Broadcast Frames
(same as GBR command
line parameter)
Specify the type of explorer frame the end station source router sends to a
broadcast destination address.
Options: Single Route Explorer Frame, All Routes Explorer Frame
Default: Single Route Explorer Frame
Send Multicast Frames
(same as MBR command
line parameter)
Specify the type of explorer frame the end station source router sends to a
multicast, group, or functional address.
Options: Single Route Explorer Frame, All Routes Explorer Frame
Default: Single Route Explorer Frame
Respond to Broadcast
Request
(same as RSP command
line parameter)
Specify how the end station source router responds to a single route
explorer frame.
Options: Specifically Routed Frame, All Routes Explorer Frame
Default: All Routes Explorer Frame
Route Update Interval
(same as TIME=number
command line parameter)
Specify the minimum delay in seconds before the end station source router
updates the route for a given node.
Range: 0 to 65,535 seconds (0=infinite)
Default: 10
Topic See
INETCFG “INETCFG” on page 69
Source routing and
broadcast frames
IBM Token-Ring Network Architecture
Reference
Parameter Use to