User Guide

Utilities 179
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SCRSAVER
Purpose
Use to lock the server console and to activate a screen saver for the console
display.
NOTE: The screen saver and the console-locking features were formerly part of
MONITOR. Separating them from monitor.nlm allows the new utility to protect the
console by using the stronger security of eDirectory authentication.
Syntax
SCRSAVER [option][;option][;option] [...]
When SCRSAVER is loaded, you can use any of the following command
options as console commands.
Storage device drivers Drivers for Host Adapters and Storage Devices
Determine the operating
status of a storage device
Activating and Deactivating a Hard Disk
Mounting and dismounting a
CD-ROM device
Managing Removable Media Devices
Command options Use to
(no parameters) Default to SCRSAVER AUTO CLEAR DELAY=60;
DELAY=600; ENABLE; ENABLE AUTO CLEAR;
ENABLE LOCK.
ACTIVATE Override the delay interval and activate the screen
saver immediately.
ACTIVATE also overrides both DISABLE and
ENABLE modes. This means that if you enter
ACTIVATE when the screen saver has been
disabled, the DISABLE mode is changed to ENABLE
so that the screen saver can appear.
Topic See