User Guide

Utilities 191
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Convert Compressed to
Uncompressed Option = value
Specify what the file system does with an decompressed version
of a file after the server has decompressed it.
Supported values:
0 = Always leave the file compressed.
1 = Leave the file compressed until second access if it is read only
once during the time specified by the Days Untouched Before
Compression parameter.
2 = Always leave the file decompressed.
Default: 1
This parameter can be set in the STARTUP.NCF file.
Decompress Percent Disk Space
Free to Allow Commit = number
Specify the percentage of free disk space required on a volume
for file decompression to permanently change compressed files
to decompressed.
Supported values: 0 to 75
Default: 10
This parameter prevents newly decompressed files from filling up
the volume.
This parameter can be set in the STARTUP.NCF file.
Decompress Free Space Warning
Interval = number
Specify the time between alerts when the file system is not
changing compressed files to decompressed because of
insufficient disk space. Setting the interval to 0 turns off the alert.
Supported values: 0 seconds to 29 days 15 hours 50 minutes
3.8 seconds
Default: 30 minutes 57.2 seconds
This parameter can be set in the STARTUP.NCF file.
Deleted Files Compression Option =
number
Specify whether and when deleted files are compressed.
Supported values:
0 = Don’t Compress deleted files
1 = Compress deleted files the next day
2 = Compress deleted files immediately
Default: 1
This parameter can be set in the STARTUP.NCF file.
Parameter Use to