User Guide

Utilities 197
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Table 6 Directory Services Parameters
Parameter Use to
eDirectory Trace to Screen = value Enable the eDirectory trace screen; this displays information
about eDirectory events on the monitor.
Supported values: ON, OFF
Default: OFF
eDirectory Trace to File = value Send messages about eDirectory events to the eDirectory trace
file on volume SYS. The default file is SYSTEM:\DSTRACE.DBG.
Supported values: ON, OFF
Default: OFF
The file path and name can be changed with the eDirectory Trace
Filename parameter.
The file is circular; it grows to a maximum length of approximately
500 KB and then starts to overwrite itself at the beginning of the
file.
If this parameter is set to ON, the trace information is also scrolled
on the screen.
eDirectory Trace Filename =
path\name
Specify the path and name of the eDirectory trace file on volume
Sys.
Maximum length: 254
Default: SYSTEM:\DSTRACE.DBG
eDirectory External Reference Life
Span = number_in_hours
Specify the number of hours unused external references are
allowed to exist before being removed.
Supported values: 1 to 384 hours
Default: 192
External references are local IDs assigned to users when they
access other servers. When users no longer have access, the
external references should be removed.