User Guide

202 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Remirror Block Size = value Set the remirror block size in 4 KB increments. (1=4 KB, 2=8 KB,
8=32 KB, etc.)
Supported values: 1 to 8
Default: 1
Concurrent Remirror Requests =
value
Set the number of remirror requests per mirror object.
Supported values: 2 to 32
Default: 32
Ignore Disk Geometry = value Create nonstandard and unsupported partitions.
Supported values: ON, OFF
Default: OFF
If you set this parameter to ON before modifying or creating a
partition, the software ignores disk geometry when creating the
partition. This allows you to create nonstandard partitions.
Caution: Setting this parameter to ON may harm other file
systems contained on the disk.
You can set this parameter in the STARTUP.NCF file.
Enable Hardware Write Back = value Enable hardware write back, if supported.
Hardware write back means that I/O write requests may be
cached at the device and succeeded before data is committed to
the media. Hardware write back usually improves write
performance.
Supported values: ON, OFF
Default: OFF
You can set this parameter in the STARTUP.NCF file.
Parameter Use to