User Guide

Utilities 213
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Display Lost Interrupts Threshold =
value
Specify the minimum number of lost interrupts per second that
must be detected before a lost interrupt alert message will be
displayed on the system console.
Supported values: ON, OFF
Default: OFF
Note: Set Display Spurious Interrupt Alerts must also be set to
ON.
You can set this parameter in the STARTUP.NCF file.
Display Spurious Interrupts
Threshold = value
Specify the minimum number of spurious interrupts per second
that must be detected before a spurious interrupt alert message
will be displayed on the system console.
Supported values: ON, OFF
Default: OFF
Note: Set Display Spurious Interrupt Alerts must also be set to
ON.
You can set this parameter in the STARTUP.NCF file.
Developer Option = value Control whether options associated with a developer environment
are enabled.
Supported values: ON, OFF
Default: OFF
You can set this parameter in the STARTUP.NCF file.
CPU Hog Timeout Amount = value Specify the amount of time in seconds to wait before terminating
a thread that has not relinquished control of the processor.
Supported values: 0 to 1 hour
Default: 1 minute
A value of 0 (zero) disables this option.
You can set this parameter in the STARTUP.NCF file.
Parameter Use to