User Guide

216 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Alert Message Nodes = number Specify the number of alert message nodes that have been
previously allocated.
Supported values: 10 to 256
Default: 20
You can set this parameter in the startup.ncf file.
Classic Work to do Pre-check Flag When a classic work to do is scheduled, this flag causes the
scheduler to verify if the work to do is scheduled. If it’s on the
scheduled list, the operating system will trap.
Replace Console Prompt with Server
Name = value
Control whether the console prompt is replaced with the NetWare
server name.
Supported values: ON, OFF
Default: ON
You can set this parameter in the STARTUP.NCF file.
Sound Bell for Alerts = value Control whether a bell sounds when an alert message appears on
the console.
Supported values: ON, OFF
Default: ON
Command Line Prompt Time Out =
time
Specify how long an .ncf file waits before executing the default
response to an optional command.
An optional command in an. ncf file is preceded by a question
mark (?). The question mark causes the file to prompt you to
execute the command. For information about optional commands
in .ncf files, see Using Server Batch Files.
Supported Values: 0 to 4294967295 seconds
Default: 10 seconds
Parameter Use to