User Guide

Utilities 217
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Command Line Prompt Default
Choice = value
Specify a default response to an optional command in an .ncf file.
An optional command in an .ncf file is preceded by a question
mark (?). The question mark causes the file to prompt you to
execute the command. For information about optional commands
in .ncf files, see Using Server Batch Files.
Supported Values: ON, OFF
Default: ON
ON means the default response to the command prompt is Y
(Yes). If the user does not respond to the prompt within a
specified time period, the command is executed by default.
OFF means the default response to the command prompt is N
(No). If the user does not respond to the prompt within a specified
time period, the command is not executed.
To specify the time period before the response is executed, use
the Command Line Prompt Timeout parameter.
Allow Audit Passwords = value Specify whether passwords can be used to identify auditors.
Supported values: ON, OFF
Default: OFF
Enable SECURE.NCF=value Execute the secure.ncf file at server startup.
Supported values: ON, OFF
Default: OFF
You can set this parameter in the AUTOEXEC.NCF or
STARTUP.NCF file.
Display Incomplete IPX Packet Alerts
= value
Specify whether alert messages are displayed when IPX receives
incomplete packets. This parameter can be used as a debugging
tool.
Supported values: ON, OFF
Default: ON
You can set this parameter in the STARTUP.NCF file.
Parameter Use to