User Guide

Utilities 221
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Enable UDP Checksums on NCP
Packets
Enable checksumming of NCP UDP packets.
Supported values:
0 = No checksums
1 = Checksum if enabled at client
2 = Require checksums
Default: 1
You can set this parameter in the STARTUP.NCF file.
Client File Caching Enabled This parameter allows or disallows the client side ecaching of
opened files. This parameter is also settable in the
STARTUP.NCF file.
NCP Protocol Preferences = value When multiple protocols are supported, specify the order in which
eDirectory selects a protocol to use when communicating with
other servers in the replica.
Supported values: IPX, TCP, UDP, none
Default: None
For example, the following command instructs eDirectory
TM
to try
TCP first and IPX second when it communicates with another
server:
SET NCP PROTOCOL PREFERENCES = TCP IPX
If only one protocol is supported, that protocol is used by
eDirectory, no matter what values are specified for this parameter.
If multiple protocols are supported, but no value is specified for
this parameter, eDirectory uses the protocols in the order in which
they are loaded.
NCP File Commit = value Control whether applications can flush pending file writes to disk.
Supported values: ON, OFF
Default: ON
If the value is set to ON then when a File Commit NCP is issued,
a file is sent from cache to disk immediately, instead of waiting for
the cache manager to send it to disk later.
Parameter Use to