User Guide

Utilities 223
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Novell Storage Service Parameters
For Novell Storage Service set parameters, see “NSS Load Commands” on
page 126, “NSS DOS FAT Commands” on page 127, “PURGE and
SALVAGE Commands” on page 127, “NSS Buffer Cache Commands” on
page 128, and “Other NSS Commands” on page 128.
Service Location Protocol Parameters
The service location protocol parameters define how SLP locates and
distributes information about services that are available on the network.
For descriptions of service location protocol parameters, see Table 14 on page
224.
Allow Change to Client Rights = value Control whether a job server can assume the rights of a client for
NCP packet signatures.
Supported values: ON, OFF
Default: ON
Note: Some job servers and third-party applications can’t
function without changing to client rights.
Using OFF might prevent some job servers from getting access
to the files they need, but it prevents the forging of a packet
through the job or print server.
You can set this parameter in the STARTUP.NCF file.
Allow LIP = value Set Large Internet Packet (LIP) support.
Supported values: ON, OFF
Default: ON
You can set this parameter in the STARTUP.NCF file.
Parameter Use to