User Guide

224 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Table 14 Service Location Protocol Parameters
Parameter Use to
SLP TCP = value Use TCP packets instead of UDP packets when possible.
Supported values: OFF, ON
Default: OFF
This parameter can be set in the STARTUP.NCF file.
SLP Debug = value Enable SLP debug mode.
 Bit 0x01 = COMM
 Bit 0x02 = TRAN
 Bit 0x04 = API
 Bit 0x08 = DA
 Bit 0x10 = ERR
 Bit 0x20 = SA
Supported values: 0 to 4294967255
Default: 0
This parameter can be set in the STARTUP.NCF file.
SLP DA Discovery Options = value Use multicast DA advertisements.
 Bit 0x01 = Use multicast Directory Agent advertisements
 Bit 0x02 = Use DHCP discovery
 Bit 0x04 = Use static file SYS:ETC\\SLP.CFG
 Bit 0x08 = Scopes Required.
These bits can be ordered together for multiple values.
Supported values: 0 to 8
Default: 3
This parameter can be set in the STARTUP.NCF file.
SLP Multicast Radius = value Specify an integer describing the multicast radius.
Supported values: 0 to 32
Default: 32
This parameter can be set in the STARTUP.NCF file.