User Guide

226 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Time Parameters
Time parameters control time synchronization, the TIMESYNC.CFG file, and
time zone settings to ensure that the time reported by all servers is consistent,
or synchronized. For more information, see the Network Time Management
Administration Guide.
For a description of time parameters, see Table 15 on page 227.
SLP Event Timeout = value Specify an integer value describing the number of seconds to wait
before timing out multicast packet requests.
Supported values: 0 to 4294967255
Default: 53
This parameter can be set in the STARTUP.NCF file.
SLP DA Heart Beat Time = value Specify an integer value describing the number of seconds before
sending the next Directory Agent heartbeat packet.
Supported values: 0 to 4294967255
Default: 10800
This parameter can be set in the STARTUP.NCF file.
SLP Close Idle TCP Connections
Time = value
Specify an integer value describing the number of seconds before
idle TCP connections should be terminated.
Supported values: 0 to 4294967255
Default: 300
This parameter can be set in the STARTUP.NCF file.
SLP DA Event Timeout = value Specify an integer value describing the number of seconds to wait
before timing out Directory Agent packet requests.
Supported values: 0 to 429
Default: 5
This parameter can be set in the STARTUP.NCF file.
Parameter Use to