User Guide

Utilities 231
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Time Zone = time_zone_string Specifies the time zone string, which indicates:
 The abbreviated time zone name
 The offset from Coordinated Universal Time (UTC)
 The alternate abbreviated time zone name to be used when
daylight saving time is in effect
Maximum: 80 characters
Default: No Time Zone
This parameter causes UTC time to be recalculated from local
time.
You can set this parameter in the STARTUPCF file.
Default Time Server Type =
type_of_time_source
Specify the default time synchronization server type. This
parameter can be overridden by other time synchronization
parameters.
Supported types: Reference, primary, secondary, single
reference.
Supported types: Reference, primary, secondary, single
reference
Default: Secondary
You can set this parameter in the STARTUPCF file.
Start of Daylight Savings Time =
date_and_time
Specify the local date and time when the change to daylight
saving time should occur.
Maximum: 79 characters
IMPORTANT: You must set both the start and end of daylight
saving time before either date is actually scheduled.
End of Daylight Savings Time =
date_and_time
Specify the local date and time when the change from daylight
saving time should occur.
Maximum: 79 characters.
IMPORTANT: You must set both the start and the end of daylight
saving time before either date is actually scheduled.
Parameter Use to