User Guide

232 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Traditional File Parameters
Traditional file parameters now contain parameters that were previously
designated as Directory Caching, File Caching, Error Handling, File System,
Locks, and Transistion Tracking
File Caching Parameters for the Traditional File System
File caching allows faster access to frequently used files by holding a file (or
a portion of it) in disk cache memory. Files being read from or written to are
kept in file cache buffers. When the requested data is already in cache, disk
reads are unnecessary.
Daylight Savings Time Offset = [+ or -
] hour:minute:second
Control the offset applied to time calculations when daylight
saving time is in effect.
Default: +1:00:00
This parameter causes UTC time to be recalculated from local
time.
You can set this parameter in the STARTUP.NCF file.
Daylight Savings Time Status = value Indicate whether daylight saving time is in effect.
Supported values: ON, OFF
Default: OFF
If this parameter is set to ON, you should also use the Daylight
Savings Time Offset parameter.
Changing the daylight saving time status does not change the
local time.
You can set this parameter in the STARTUP.NCF file.
New Time With Daylight Savings
Time Status = value
Control the adjustment of local time when daylight saving time is
in effect.
Supported values: ON, OFF
Default: OFF
ON = Adjust the local time by adding or subtracting the Daylight
Savings Time Offset parameter.
Parameter Use to