User Guide

Utilities 247
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
For descriptions of error handling parameters, see the following table.
Table 20 Error Handling Parameters for the Traditional File System
Parameter Use to
Volume Log File State = number Control what happens when the VOL$LOG.ERR file is larger than
the size specified by the Volume Log File Overflow Size
parameter.
Supported values:
0 = Leave VOL$LOG.ERR as is
1 = Delete VOL$LOG.ERR
2 = Rename VOL$LOG.ERR
Default: 1
You can set this parameter in the STARTUP.NCF file.
Volume TTS Log File State = number Control what happens when the TTS$LOG.ERR file is larger than
the size specified by the Volume TTS Log File Overflow Size
parameter.
Supported values:
0 = Leave TTS$LOG.ERR as is
1 = Delete TTS$LOG.ERR
2 = Rename TTS$LOG.ERR
Default: 1
You can set this parameter in the STARTUP.NCF file.
Volume Log File Overflow Size =
number
Specify the maximum size of the VOL$LOG.ERR file before the
action specified by the Volume Log File State parameter occurs.
Supported values: 65536 to 4294967295
Default: 4194304
You can set this parameter in the STARTUP.NCF file.
Volume TTS Log File Overflow Size =
number
Specify the maximum size of the TTS$LOG.ERR file before the
action specified by the Volume TTS Log File State parameter
occurs.
Supported values: 65536 to 4294967295
Default: 4194304
You can set this parameter in the STARTUP.NCF file.