User Guide

256 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Using START PROCESSORS
 To bring a specific secondary processor online, enter at the console
prompt:
START PROCESSORS 1
A confirmation message is displayed:
Processor 1 is ONLINE.
 To bring all secondary processors online, enter at the console prompt:
START PROCESSORS
A confirmation message is displayed:
Processor 1 is ONLINE.
Processor 2 is ONLINE.
Processor 3 is ONLINE.
 If you choose to start secondary processors when NetWare boots, use Set
Auto Start Processors = OFF in the startup.ncf file (see “Multiprocessor
Parameters” on page 218).
 To stop secondary processors, see “STOP PROCESSORS” on page 257.
 For more information, see Starting and Stopping Processors.
STATICON
Purpose
You use the Static Routing Configuration utility (STATICON) to open a
connection to a remote IPX
TM
router and configure static routes and services
at each end of the connection.
n... Specify by processor number the secondary
processors to start.
Parameter Use to