User Guide

260 Utilities Reference

Utilities Reference

103-000153-001

August 29, 2001

Novell Confidential

Manual 99a38 July 17, 2001

place the commands to create swap files into the AUTOEXEC.NCF file

so the files will be created each time the server is started.

 Swap files are dynamic; they change size as data is swapped in and out of

memory.

Additional Information

TCPCON

Purpose

Use at the server console to

 Monitor activity in the TCP/IP network segments of your internetwork

 View configuration and statistics information about the following TCP/IP

protocols: IP, ICMP, UDP, TCP, OSPF, and EGP

 View IP routes known to a TCP/IP node

 View network interfaces supported by a TCP/IP node

 Access the trap log maintained by SNMPLOG (local systems only)

 Use Simple Network Management Protocol (SNMP) over TCP/IP or

IPX

to access TCP/IP information in any remote protocol stack

supporting the TCP/IP Management Information Base (MIB)

Syntax

[LOAD] TCPCON

Using TCPCON

 By default, TCPCON monitors and gathers information from the local

NetWare

TCP/IP node.

You can, however, access another TCP/IP node on your internetwork if

you know the symbolic hostname or host IP address of that node.

Topic See

Virtual Memory Virtual Memory