User Guide

270 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
UNBIND Driver Parameters
Parameter Use to
protocol Specify the name of the protocol you want to
unbind.
LAN_driver | board_name Specify the name of the LAN driver or the
network board from which you are unbinding
the protocol.
driver_parameter Specify one or more driver parameters if you
have more than one network board of the same
type in your server. See “UNBIND Driver
Parameters” on page 270.
NOTE: Enclose driver parameters in square
brackets.
Driver parameter Use to
[DMA=number] Specify the DMA channel for the board. Use
the same channel you did when you loaded the
driver.
[FRAME=number] Specify the frame type for the board. Use the
same frame type you did when you loaded the
driver.
[INT=number] Specify the interrupt for the board. Use the
same interrupt you did when you loaded the
driver.
[MEM=number] Specify the memory address for the board. Use
the same memory address you did when you
loaded the driver.
[PORT=number] Specify the I/O port for the board. Use the
same I/O port you did when you loaded the
driver.