User Guide

Utilities 279
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Using VOLUME
When you execute VOLUME without the name parameter, a message similar
to the following appears:
Mounted Volumes Name Spaces Flags
SYS DOS Cp Sa Mg
The output lists each mounted volume, its name spaces, and the flags that are
set for that volume. The three possible flags are:
Cp—indicates that file compression is enabled on the volume
Sa—indicates that block suballocation is enabled on the volume
Mg—indicates that migration is enabled on the volume
When you execute volume name, the screen displays more detailed
information about the specific volume, such as the following:
Figure 3 Volume Information
VREPAIR
Purpose
For traditional NetWare volumes, use at the server console to
 Correct volume problems
 Remove name space entries from Directory Entry Tables
NOTE: You can’t use VREPAIR on a mounted volume.
Also, VREPAIR is not used to repair NSS volumes. For NSS volumes, you must
use the REBUILD utility. See “REBUILD” on page 149.