User Guide

LAN Driver Statistics 291
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
 Table 28, “Custom Statistics for Token Ring Drivers,” on page 303
 Table 29, “Custom Statistics for IBM Baseband PCN2L Drivers,” on
page 305
NOTE: Custom statistics vary, depending on the LAN driver installed. For
statistical information about third-party drivers not listed in the custom statistics
section, check the documentation that comes with the driver.
Table 23 LAN Driver Statistics
Statistic Description
Driver Name The driver name and parameters that correspond to the hardware
settings on the network board.
Version The current version of the driver.
Logical Board Number The number which uniquely identifies each time a driver is
registered with the system.
Board Instance Number The number assigned to each physical adapter for which the
driver has been loaded..
Node Address The station or node address of the network board in the NetWare
server.
Protocols The communication protocols bound to the driver with BIND.
Network The network number assigned to the cabling system the LAN
driver is operating on. Appears only if the IPX
TM
protocol has
been bound to the board.
Total Packets Transmitted The number of packets sent from the NetWare server through this
LAN driver since the driver was loaded.
(By comparing this figure with the figures for other LAN drivers,
you can see which driver is handling the most traffic.)
This value is maintained by the TSM module.
Total Packets Received The number of packets received by the NetWare server sincethe
driver was loaded. This includes file service requests, packets
routed to another network, and packets sent to other IPX sockets
in the NetWare server.
This value is maintained by the TSM module.