User Guide

298 Utilities Reference
Utilities Reference
103-000153-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Table 27 Custom Statistics for NE2000, NE2, NE2_32, CNE2_32, and Other Ethernet Drivers
LEM, link rejected The link error monitor (LEM) count of the times that a link was
rejected
LEM, total errors The aggregate link error monitor (LEM) error count.
Connection state The state of this port’s Physical Connection Management (PCM)
state machine:
0=Off; 1=Break; 2=Trace; 3=Connect; 4=Next; 5=Signal; 6=Join;
7=Verify; 8=Active; 9=Maint
Statistic Description
UnderrunErrorCount This counter is incremented when the RAM buffer on the network
board is full; the board cannot accept any more packets until the
RAM buffer is cleared.
TransmitTimeoutCount This counter is incremented when a network board interrupts the
file server with the message that the send bit is lost.
This is a hardware problem caused by faulty cabling, a bad
network board, or a missing terminator.
RxPagingErrorCount This is a count of the errors that occur when internal buffers on
the board are corrupted.
ReceiveFIFOOverrunErrorCount This counter is incremented when an incoming packet causes an
overflow because FIFO was not serviced.
ReceiverMissedPacketCount This counter is incremented when a packet is sent to a network
board that cannot accept the packet because all its receive
buffers are full.
GotNothingCount This counter is incremented when the file server receives an
interrupt from a network board that is not transmitting or receiving
anything.
This is not serious.
UnsupportedFramePacketCount This counter is incremented when a packet is received by the
LAN driver with a frame type that hasn’t been loaded for the given
board.
Statistic Description