User Guide

Setting Up the NetWare Server 29
Server Operating System Administration Guide
103-000148-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Changing Code Pages
Changing code pages on the NetWare server or on DOS can usually be done
while the computer is operating. However, changing code pages on a
Windows 3.1x or a Windows 95 workstation might require installing
additional software and restarting Windows. For background information
about Unicode and other code pages, see “Code Pages” on page 26.
For more information on changing code pages using the CHARSET
command, see CHARSET in Utilities Reference.
To change the code page on Do the following
NetWare Server At the System Console prompt, type
CHARSET CPxxx
where xxx is the number of the code page you want
to load.
The following code pages are supported: 437, 737,
850, 852, 855, 857, 860, 861, 863, 865, 866, 869.
DOS Follow instructions that come with the DOS
operating system.
Windows 3.1x, Windows 95, Windows NT Follow instructions that come with the operating
system.
You might be required to install a new set of
Unicode translation tables, found on the NetWare
product CD. You will need the following:
 UNI_newpage#.platform: Translates the new
code page to Unicode and Unicode to the new
code page
 UNI_MON.platform: Converts characters to
lower case to facilitate comparisons
 UNI_UPR.platform: Handles uppercase
characters
The following platform extensions are included:
.W16 (Windows 3.1x)
.W32 (Windows 95, Windows NT*)
.DOS (DOS)