User Guide

Optimizing the NetWare Server 41
Server Operating System Administration Guide
103-000148-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
In SET
1
At the System Console prompt, enter
SET
A numbered list of server parameter categories is displayed.
2 Enter the number associated with the category you want to view.
A list of parameter names is displayed. The name of each parameter
appears highlighted in white with the current setting highlighted in
yellow. The information also includes the limits (or range of valid values),
the .NCF file the parameter can be set in, and a brief description.
If necessary, press any key to display additional parameters in the same
category. Press Esc to exit the category.
3 To select another category, repeat the previous steps.
Printing Current Parameter Values to a File
Most settings for NetWare server parameters are now persistent, whether you
set them using NetWare Remote Manager, MONITOR, or SET. Nevertheless,
you should record your optimum server configuration as part of documenting
your network.
To write current values of settable parameters to a file and print it, complete
the following:
1 Access NetWare Remote Manger.
2 Click the Set Parameters link in the navigation frame.
3 In the Save Settings to a File on Volume SYS: field, accept the default
filename (SETTINGS.TXT) or enter a different filename.
4 Click the Save button to the right of the Save Settings to a File on Volume
SYS: field.
5 Browse to the file on the server and print it.