User Guide

Managing Server Memory 37
Server Memory Administration Guide
103-000147-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Load one module into
the next available
protected address
space with restart
functionality
 Restart functionality
means that if the
protected space
abends, the system
closes the space,
cleans up its
resources, restarts
the space, and
reloads the module
into it.
 To prevent the server
from restarting a
memory space that
continues to fault,
use the Memory
Protection No Restart
Interval Set
parameter (Memory
category).
[LOAD] RESTART
module_name
1. Type RESTART
module_name in
the Load Module
Protected field.
2. (Optional) If you
want to view the
System Console
screen when the
module loads,
check the Display
System Console
for Module Load
check box.
3. Click the Load
Module Protected
button.
4. (Optional) If you
want to change
the restart state to
No, click the Yes
button in the
Restartable
column of the
Address Space
Information table.
RESTART
DATABASE.NLM
Creates a new address
space called
ADDRESS_SPACEn,
where n is a numerical
number, and loads
DATABASE.NLM into it.
If the address space
abends, the system will
shut down the space,
restart the space
automatically, and
reload DATABASE.NLM
into it.
To Enter this command at the
System Console prompt
Do this on the Address
Space Information Page of
NetWare Remote Manager
Example