User Guide

CAPTURE Messages 23
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
CAPTURE Messages
The following messages include messages from the CAPTURE.EXE.
CAPTURE-X-163: This workstation does not have enough memory to run CAPTURE.
Source: CAPTURE.EXE
Possible Cause: This workstation does not have enough available memory. This utility requires
a minimum of from 235 KB to 275 KB of memory.
NOTE: Execution time increases if limited memory is available.
Action: Increase the memory that is available to the workstation. See “Resolving
Workstation Memory Problems” on page 787.
CAPTURE-X-229: The job configuration contains a form that does not exist.
Source: CAPTURE.EXE
Possible Cause: The form specified in the print job configuration might have been deleted.
Action: Modify the print job configuration to specify a form that exists. Or, specify the
form on the command line using the Form= command.
CAPTURE-X-906: The Unicode files cannot be found.
Source: CAPTURE.EXE
Action: See message “906: The Unicode files cannot be found.” on page 776.
CAPTURE-X-917: This utility was unable to set the context.
Source: CAPTURE.EXE
Action: See message “917: This utility was unable to set the context.” on page 778.