User Guide

DSI Messages 49
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
DSI Messages
This module contains some messages that are not numbered. These message
are listed alphabetically after the numbered messages.
DSI-X-1: An internal error has occurred. DSI cannot load the message file.
Source: DSI.NLM
Explanation: The DSI.NLM program was unable to load the DSI.MSG message file .
Action: Make sure that the server language is set to 4 (English) for the built-in
messages, or to a different number to correspond to both of the following:
 The DSI.MSG file if one is in the boot directory (where SERVER.EXE is
found).
 The corresponding SYS:SYSTEM\NLS\X directory on the server.
If the problem persists, contact a Novell
®
support provider.
DSI-X-2: Insufficient memory is available to get a memory resource tag.
Source: DSI.NLM
Possible Cause: Insufficient memory at the server would not allow the installation to run.
Action: Increase the available memory at the server. See Freeing Server Memory
Temporarily in theServer Operating System Administration Guide.
DSI-X-3: An internal error has occurred. DSI cannot insert a predefined entry. Error
description: description.
Source: DSI.NLM
Action: Try the operation again. If the problem persists, contact a Novell support
provider.