User Guide

58 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Possible Cause: An internal error might have occurred.
Action: If the problem persists, contact a Novell support provider.
DSI-X-40: An internal error has occurred. DSI cannot set the bindery context. Error
description: description.
Source: DSI.NLM
Possible Cause: An internal error might have occurred.
Action: Try the operation again. If the problem persists, contact a Novell support
provider.
DSI-X-41: DSI cannot modify the existing NCP server object. Error description:
description.
Source: DSI.NLM
Possible Cause: An internal error might have occurred.
Action: Try the operation again. If the problem persists, contact a Novell support
provider.
DSI-X-42: DSI cannot delete the existing NCP server object. Error description:
description.
Source: DSI.NLM
Explanation: An NCP server object that had the same name as the server being installed was
found in this context. To complete the installation, that object must be deleted
and re-created. An initial attempt at deleting the object was unsuccessful.
Possible Cause: The object corresponding to the administrator that you logged in as does not
have Delete rights in the current context.
Action: Make sure you have the Supervisor right in the current context (or to the
nearest parent to the context) where you are installing. If this is not the case,
give yourself Supervisor rights in the context and retry the installation. If the
problem persists, contact a Novell support provider.
DSI-X-43: DSI cannot create the NCP server object. Error description: description.
Source: DSI.NLM
Explanation: An attempt to create the NCP server object in the context specified for this
server was unsuccessful.