User Guide

DSI Messages 69
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
DSI-X-89: An attempt to remove an extraneous replica of the new Directory partition
replica failed. Error: description. This is not a fatal problem, however, the installation
should continue normally. A read/write replica of the partition will exist on server
name. You may delete this replica after the installation is complete using the Partition
Manager (PARTMGR) utility.
Source: DSI.NLM
Action: As stated in the message, you might want to delete the read/write replica after
the installation is complete using the Partition Manager or PARTMGR. For
information about a specific error code, search the Error Codes online
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).
DSI-X-90: DSI cannot resolve to the root of the Directory tree. Error description:
description. Make certain that a server containing the replica of the root partition is
up and connected to the network.
Source: DSI.NLM
Explanation: A replica of the root partition for the Directory tree you are trying to install is
not visible to this server, or internal errors have occurred.
Action: Make sure a server containing a replica of the root partition is up. Resolve any
network problems that might be present. If this fails, contact a Novell support
provider.
DSI-X-91: DSI cannot resolve to the master partition containing the NCP Server
object. Error description: description. Make certain that this server is up and
connected to the network.
Source: DSI.NLM
Explanation: DSI cannot find the NCP Server object for this server in any master Directory
partition replica.
Possible Cause: The server that contains the master partition (which contains the server object)
is not operating or is not visible on the network from this server.
Action: Make sure a server containing the master replica of the partition containing the
server object is operating. Resolve any network problems that might be
present. If the problem persists, contact a Novell support provider.