User Guide

DSREPAIR Messages 81
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
DSREPAIR-x-011: Stack overflow, frame size = hex number, ESP = hex number.
Source: DSREPAIR.NLM
Possible Cause: An internal error occurred.
Action: Try running DSREPAIR again, or reboot the server, then run DSREPAIR
again.
DSREPAIR-x-013: Could not open all of the Directory Services files.
Source: DSREPAIR.NLM
Explanation: Four Directory database files are stored in a secure area of the NetWare
®
server's volume SYS. These files were found, but DSREPAIR could not
access them.
Action: Try rebuilding the volume using REBUILD (NSS Logical volume) or
VREPAIR (Traditional volume. If this does not solve the problem, reinstall
eDirectory and restore the objects to the Directory if necessary.
DSREPAIR-x-014: Could not establish basic access to record manager.
Source: DSREPAIR.NLM
Explanation: A request made to the record manager of the DS.NLM program to gain control
of the database failed.
Action: Unload then reload eDirectory. If this does not work, reboot the server and try
again.
DSREPAIR-x-015: Could not establish full access to record manager.
Source: DSREPAIR.NLM
Explanation: A request made to the record manager of the DS.NLM program to gain control
of the database failed.
Action: Unload then reload eDirectory. If this does not work, reboot the server and try
again.
DSREPAIR-x-016: Volume SYS is not mounted, cannot access Directory Services
files.
Source: DSREPAIR.NLM
Explanation: The volume SYS: must be mounted to use eDirectory because it contains the
eDirectory database files.
Action: Make sure the volume SYS: is mounted.