User Guide

DSREPAIR Messages 89
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Action: Try the operation again. If the error persists, contact a Novell support provider.
Possible Cause: The server has insufficient memory.
Action: Increase the available memory to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide. Try the
operation again. If the server has at least 500 KB of free memory, contact a
Novell support provider.
DSREPAIR-x-043: Unable to create an NWSNUT portal.
Source: DSREPAIR.NLM
Explanation: The server might be out of memory.
Action: Increase the available memory to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide. Try the
operation again.
DSREPAIR-x-044: Could not read from file: name, offset number. Record will be
padded with 0's.
Source: DSREPAIR.NLM
Explanation: DSREPAIR could not read a record from the eDirectory database; however,
rather than aborting the repair, the record is filled with 0's and the repair
operation will continue.
Action: No further action is required.
DSREPAIR-x-045: Could not gain access to Directory Services. Another NLM has
already registered with DS. This could be one of DSI.NLM, DSMERGE.NLM or
DSREPAIR.NLM.
Source: DSREPAIR.NLM
Explanation: Only one of the three described NLM programs can be loaded at a time.
Action: Check to see if one of these NLM programs are loaded and unload it. If that
does not resolve the problem, bring down the server and bring it back up. Then
retry the operation.