User Guide

108 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FILESYS-X-194: User name connection number attempted to extend the length of a
file with no owner. Filename: name.
Source: FILESYS.NLM
Explanation: A file needed to be extended; however, because the file had no owner, the
operation was aborted.
Action: Delete the file, or assign the file an owner.
FILESYS-X-231: Insufficient RAM to compress file.
Source: FILESYS.NLM
Explanation: The compression system could not allocate enough memory to compress the
file.
Possible Cause: The server could be congested.
Action: No immediate action is required. The file will remain uncompressed; the
system will try to compress it later.
Possible Cause: The server might not have enough memory to compress a file.
Action: If the message occurs even during periods of low network traffic, the server
probably needs more memory. See Freeing Server Memory Temporarily in the
Server Operating System Administration Guide.
FILESYS-X-232: Disk I/O error compressing file.
Source: FILESYS.NLM
Possible Cause: A bad I/O has occurred during file compression. The disk drive or disk
hardware might be starting to malfunction. The file that was being compressed
will remain uncompressed, and the system will try again later to compress it.
Action: See Disk Errors in the Server Operating System Administration Guide.
FILESYS-X-234: Insufficient disk space to decompress file filename for station
number.
Source: FILESYS.NLM
Explanation: The disk space required for the decompressed file is not available, so the file
cannot be decompressed.