User Guide

FILESYS - File System Messages 119
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FILESYS-X-326: Insufficient memory available for user restriction nodes.
Source: FILESYS.NLM
Explanation: A call for memory from within the set_user_restriction routine failed. This
memory would have been used to create user restriction node IDs.
Possible Cause: The server does not have enough memory.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
FILESYS-X-327: Invalid directory number code.
Source: FILESYS.NLM
Explanation: The system found that the subdirectory entry it was about to examine did not
have the correct directory number (-4) of user restrictions, trustees, and
deleted file blocks.
Action: Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS-X-328: Invalid subdirectory number in file directory entry.
Source: FILESYS.NLM
Explanation: A subdirectory had a number that was greater than or equal to the maximum
number of directory entries.
Possible Cause: This error probably indicates file system corruption.
Action: Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.