User Guide

FILESYS - File System Messages 123
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FILESYS-X-346: UNIX Hard Link flags don't match between the name spaces.
Source: FILESYS.NLM
Possible Cause: The name spaces cannot be linked because their flags do not match.
Action: Make sure that the UNIX hard link flags match before trying to link the name
spaces.
FILESYS-X-347: The server is not configured to support this volume's DOS type.
Source: FILESYS.NLM
Possible Cause: The uesr tried to mount a volume whose name space (for example, Macintosh)
has not yet been configured on the server.
Action: Try to mount the volume again after configuring the server to support the
appropriate name space.
FILESYS-X-348: Error creating suballocation file space.
Source: FILESYS.NLM
Possible Cause: This error might indicate file system corruption.
Action: Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS-X-350: File is flagged as both compressible and uncompressible.
Source: FILESYS.NLM
Possible Cause: The system does not know whether to perform file compression on a given file
because the file has been assigned both the Immediate Compress (Ic) and
Don't Compress (Dc) attribute.
Action: Use FLAG to remove the Immediate Compress or the Don't Compress file
attribute on the given file.