User Guide

FILESYS - File System Messages 125
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FILESYS-X-412: Two subdirectories reference the same first directory block.
Source: FILESYS.NLM
Explanation: The operating system encountered a problem while mounting a volume.
Possible Cause: Two subdirectories reference the same directory block.
Action: Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS-X-413: Not enough memory to validate directory.
Source: FILESYS.NLM
Explanation: The server had enough memory to read the directory tables, but it did not have
enough memory to validate the directories. Before the volume was
dismounted, you received a warning that the you were running out of memory
and that you could not remount the volume because it had grown too much.
This error could occur at one of the following points in the volume mount:
 After comparing mirrored directory lengths.
 During setup of extra directory structures.
 During directory space restriction routines.
 While adding directory trustees.
 During maintenance routines.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
FILESYS-X-414: Invalid maximum space defined in subdirectory.
Source: FILESYS.NLM
Explanation: The operating system encountered a problem while mounting a volume.
Possible Cause: This error probably indicates corruption.
Action: Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.