User Guide

FILESYS - File System Messages 127
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
name spaces was marked as the originating name space. NetWare assumes that
the name was generated by the DOS name space.
Action: Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS-X-472: Volume already supports this Name Space.
Source: FILESYS.NLM
Explanation: This status messate indicateds that the specified name space has already been
added to the volume. A volume can be configured only once for a specific type
of name space.
FILESYS-X-475: Add name space aborted by the user.
Source: FILESYS.NLM
Explanation: This status message indicates that after beginning installation of a name space,
the user opted to discontinue the operation.
FILESYS-X-477: Error reading directory on NameSpace upgrade...volume is left in a
bad state.
Source: FILESYS.NLM
Explanation: This error occurred when an ADD NAME SPACE command was issued.
Possible Cause: The error could indicate file system corruption.
Action: Run VREPAIR with the Remove Name Space Support from the Volume
option.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.