User Guide

128 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FILESYS-X-481: Add name space aborted by the user due to insufficient disk space.
Source: FILESYS.NLM
Possible Cause: There is insufficient disk space to add the desired name space.
Action: Increase the available disk space on the volume. See Resolving Server Disk
Space Problems in the Server Operating System Administration Guide.
FILESYS-X-482: Add name space aborted due to insufficient server RAM.
Source: FILESYS.NLM
Explanation: There is insufficient memory to add the desired name space.
Possible Cause: The server might not have enough available memory.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
FILESYS-X-483: Error allocating new entry on NameSpace upgrade...volume is left in
a bad state.
Source: FILESYS.NLM
Explanation: An error occurred when an ADD NAME SPACE command was issued.
Possible Cause: The error could indicate file system corruption.
Action: Run VREPAIR with the Remove Name Space Support from the Volume
option.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS-X-484: Error setting entry name on NameSpace upgrade...volume is left in a
bad state.
Source: FILESYS.NLM
Explanation: An attempt to set a name space name has failed. The name space will not be
effective, and problems with other name spaces might occur.
Possible Cause: There might not be enough disk space or system memory to handle the name
space.