User Guide

FILESYS - File System Messages 137
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FILESYS-X-521: Station number record lock threshold exceeded. Total violations
number.
Source: FILESYS.NLM
Explanation: The number of record locks on the server for the specified station exceeded
the limit specified. Applications that request record locks do not function
properly until record locks are released by other applications. The total
violations number indicates the number of requests that failed to lock a record
because the record lock threshold limit was exceeded.
Action: Increase the number of record locks using the SET console command. For the
syntax and value required, see the parameters for the SET comand SET
MAXIMUM RECORD LOCKS PER CONNECTION.
Increasing the number of record locks will increase the amount of memory
required by the server. Increase the memory available to the server. See
Freeing Server Memory Temporarily in the Server Operating System
Administration Guide.
FILESYS-X-524: RT Data Migrator Default Read Write Support Module has been
changed.
Source: FILESYS.NLM
Explanation: This status message indicates that the default support module has been
changed to a new support module.
FILESYS-X-525: Volume name mounted with no Migration NLM loaded, some files
may be inaccessible.
Source: FILESYS.NLM
Possible Cause: The volume was mounted with files that cannot be accessed until the
RTDM.NLM is loaded.
Action: Load RTDM.NLM and the appropriate support module.
FILESYS-X-526: Volume name mounted without a specified Migration Support NLM.
Some files maybe inaccessible.
Source: FILESYS.NLM
Explanation: A volume has been mounted with files that cannot be accessed until the
support module needed to access the files has been loaded.
Action: Load the appropriate support NLM program.