User Guide

142 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FILESYS-X-583: TTS disabled because of error reading backout file.
Source: FILESYS.NLM
Explanation: The Transaction Tracking System (TTS) could not read the backout file. TTS
was disabled because it could not reliably back out any transactions. TTS
protection is gone, but completed transactions are intact.
Action: No further action is required. You can continue without TTS protection.
FILESYS-X-584: TTS disabled because of error writing to file during backout.
Source: FILESYS.NLM
Explanation: The Transaction Tracking System (TTS) had a problem writing to the actual
database for which it was backing out transactions, so it disabled itself to
prevent further problems.
Possible Cause: The database is probably corrupted.
Action: Try to determine whether the database application can read the database.
Some database programs have recovery utilities that can detect and repair
corruption.
FILESYS-X-585: TTS disabled because of too many defined volumes.
Source: FILESYS.NLM
Possible Cause: The Transaction Tracking System (TTS) can track transactions on only a
certain number of volumes. This number has been exceeded.
Action: Combine volumes so that the number is within the limit set by TTS.
FILESYS-X-586: TTS disabled because of error writing volume definition information.
Source: FILESYS.NLM
Possible Cause: A hardware failure could have occurred.
Action: See Disk Errors in the Server Operating System Administration Guiden.
FILESYS-X-587: TTS disabled because of error reading backout file during record
generation.
Source: FILESYS.NLM
Possible Cause: The Transaction Tracking System (TTS) probably disabled itself because it
failed to generate records to be written to a file. This failure occurred when