User Guide

FILESYS - File System Messages 143
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
TTS could not read the backout file for some reason. The problem could be a
hardware failure, a power failure, or a corrupted file.
Action: If you suspect file corruption, delete the file and restore from a backup.
FILESYS-X-588: TTS disabled because of error growing TTS memory tables.
Source: FILESYS.NLM
Possible Cause: The server does not have enough memory.
Action: See Resolving Server Memory Problems in the Server Operating System
Administration Guide.
FILESYS-X-589: TTS disabled because of error allocating more disk space for the
backout file.
Source: FILESYS.NLM
Possible Cause: The backout volume is full.
Action: Try adding another drive to the backout volume, deleting or compressing
existing files on the backout volume, or moving files from the backout volume
to another volume. (Increasing disk space on volumes other than the backout
volume will not help.)
FILESYS-X-590: TTS disabled because of directory error on TTS backout file.
Source: FILESYS.NLM
Possible Cause: There is not enough memory space available on the volume for the directory.
Action: Increase the percentage of volume space that can be used by the directory.
FILESYS-X-621: 1 Incomplete Transaction Found. Last record was written at
date_and_time.
Source: FILESYS.NLM
Explanation: This informational message indicates that TTS found an incomplete
transaction. Begin TTS was called without a subsequent ABORT or END.