User Guide

FILESYS - File System Messages 153
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FILESYS-X-745: Attempt to allocate memory to read volume definition tables failed.
Source: FILESYS.NLM
Possible Cause: The server does not have enough memory to mount the volume.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
FILESYS-X-746: Volume name could NOT be mounted. Some or all volume segments
cannot be located
Source: FILESYS.NLM
Possible Cause: The volume specified in the MOUNT command could not be mounted. The
volume has segments on more than one hard disk, and at least one of the hard
disks is not responding.
Action: Make sure all disk drivers have been loaded. See Disk Errors in the Server
Operating System Administration Guide.
FILESYS-X-748: Attempt to allocate memory to hold NetWare partition information
failed.
Source: FILESYS.NLM
Possible Cause: The server does not have enough memory to hold partition information.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
FILESYS-X-759: Unable to read volume definition table from NetWare partition on
drive.
Source: FILESYS.NLM
Possible Cause: The volume definition table on the specified drive could not be read because
of a disk error. Consequently, the volume could not be mounted.
Action: Check the disk drive and the cable. See Disk Errors in the Server Operating
System Administration Guide.