User Guide

154 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FILESYS-X-760: Volume definition table mirror mismatch on drive. NetWare partition
ignored.
Source: FILESYS.NLM
Explanation: Four copies of the Volume Segment Definition table are kept on each NetWare
partition. This error indicates that these copies do not match.
Action: Rename or delete the volume.
FILESYS-X-761: Block allocation size does not match.
Source: FILESYS.NLM
Explanation: Two segments of the volume claim different block allocation sizes.
Possible Cause: Two volumes on the server have identical names, and a segment from each
volume is causing the error.
Action: Unload the disk driver for the volume that you do not want to rename. Rename
the other volume (the volume that is on the hard disk that still has its disk
driver loaded). Then load the disk driver that you just unloaded. Mount both
volumes.
Possible Cause: The volume is corrupted.
Action: Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS-X-762: Number of segments in the volume does not match.
Source: FILESYS.NLM
Explanation: Two segments of the volume claim different numbers of segments.
Possible Cause: Two volumes on the server have identical names and a segment from each
volume is causing the error.
Action: Unload the disk driver for the volume that you do not want to rename. Rename
the other volume (the volume that is on the hard disk that still has its disk
driver loaded). Then load the disk driver that you just unloaded. Mount both
volumes.
Possible Cause: The volume is corrupted.