User Guide

FILESYS - File System Messages 161
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FILESYS-X-780: Invalid directory table 0 starting block of number on volume of size
number.
Source: FILESYS.NLM
Explanation: A segment on the primary volume has an inconsistency in the starting point of
the directory table of block pointers.
Possible Cause: The table is probably corrupted.
Action: Run VREPAIR on the primary volume.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS-X-781: Invalid directory table 1 starting block of number on volume of size
number.
Source: FILESYS.NLM
Possible Cause: A segment on the mirrored volume has an inconsistency in the starting point
of the directory table of block pointers.
Action: Run VREPAIR on the mirrored volume.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS-X-782: Reserved area is not zero filled.
Source: FILESYS.NLM
Possible Cause: While mounting a volume, the operating system found that the reserved area
of a segment definition was not zero-filled as it should be. Therefore, the
segment was not included in the volume definition table.
Action: Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.