User Guide

162 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FILESYS-X-783: Volume name has multiple sync definitions. All definitions except
number discarded.
Source: FILESYS.NLM
Explanation: This informational message indicates that while checking a volume definition
during mounting of the volume, the operating system discarded all unneeded
synchronization values.
FILESYS-X-784: Volume name has multiple definitions for segment number.
Source: FILESYS.NLM
Possible Cause: While mounting a volume, the operating system found multiple definitions for
the specified segment, indicating that the current synchronization value is
invalid. The operating system will discard the invalid synchronization value.
FILESYS-X-785: Volume name is missing segment number.
Source: FILESYS.NLM
Possible Cause: While checking a volume definition during mounting of the volume, the
operating system found that a segment was missing. Segments are
consecutively numbered.
Action: If the problem persists, contact a Novell support provider.
FILESYS-X-786: Volume name segment number ends at block number and segment
number starts at block number.
Source: FILESYS.NLM
Possible Cause: The volume segments are not contiguous.
Action: Before troubleshooting the problem, back up all data. Make sure that the
operating system can recognize all disks over which the volume is distributed
and that none have been corrupted. Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.